![]() If you DO have account from please skip to Step 10. Get to know more details of each function and configuration please go to Download Center to download the manual of your product. Step 1 Please refer to How to log into the web-based management interface of TP-Link Wireless Dual Band 4G LTE Router (new logo) Step 2 Go to Advanced > Network > Dynamic DNS. Step 5: Connect your TP-Link router to the root router with an Ethernet cable (LAN to LAN) and test your wireless connection through your computer. Click SAVE (bottom of the list of DHCP Server settings), then click Reboot on the rightmost side of the top navigation bar for your changes to take effect. Step 4: Once you’ve logged back into the interface, click DHCP Server on the left panel. Note: After changing the IP address settings, you’ll need to reboot your router, then log back into the router with the new IP address. Copyright 2023 TP-Link Corporation Limited. ![]() Once the link light goes green, you have. It is recommended to connect your device directly to TP-Link modem with the wired Ethernet cable. Power your TP-Link router on and let it communicate with your main router. Change the LAN IPv4 to one on the main router’s subnet, then click SAVE.Įxample: If the root router’s IP is 192.168.0.1 with an IP range of 192.168.0.2-192.168.0.100 you would set the TP-Link device to 192.168.0.101 Connect your TP-Link router to your main router using Ethernet. Input your Wireless Network Name (SSID) and Password, then click Save (bottom left of the screen) to save your changes. Step 2: Click Basic on the top navigation bar, then select Wireless on the left panel. Maybe you want to place it closer towards your study after the test. Make sure you dont mount the router before youve tested the speed in the house. You might need a longer Ethernet cable to connect your modem to your router. If you have a house with 3 floors, you preferably place it on the second floor. Generally speaking, youd want to place your router in a central spot. Now, connect your computer to the TP-Link Router network, wirelessly, or. Go to Basic > Parental Controls or Advanced > Parental Controls page. 1.Think about where you want to place the router before you set it up. Connect your TP-Link Router and Modem by using an Ethernet Cable in the WAN port. If needed, you may refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? for more detailed information. Visit and log in with the password you set for the router. The default login username and password are both admin (all lower case). Step 1: Log into the router using or the default IP address. For instance, the TP-Link Deco XE75 and other mesh routers from TP-Link’s Deco lineup feature a taller cylindrical design while the Linksys Atlas Max 6E looks like a massive tower that will take. Note: To avoid connection issues during setup, make sure to complete the following steps through a computer wired directly to the router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |